Advertisement
All manuals and user guides at all-guides.com
UP308BH (DSS2465) ENG OM
12/28/04
ABOUT THE MENU
Most of the handset settings are set from the menu. The menu has 5 main menus
(DirectLink Mode, Handset Setup, Answ. Setup, Global Setup, and System Reset)
and submenus respectively.
For Answ. Setup,
Global Setup, and
Summary of the Main Menu and Submenu
System Reset
(Deregister HS)
Two Way Communication between the Handsets Anywhere without the
menu, make sure the
line is not in use,
Base (DirectLink)
and the handsets are
Select this menu to enter the Two Way Communication between the Handsets Anywhere
within the range
without the Base (DirectLink) mode. If you have 2 or more handsets, a pair of handsets
limits of the base.
work as transceivers. Use them at a shopping mall to stay in contact with family and
friends. To use this feature, you must set the two handsets to the DirectLink mode first
(see page 16).
Handset Setup
All settings must be set separately for each handset in the Handset Setup menu.
Submenu name
Ringer Volume
Ringer Tones
Distinct. Ring
(Distinctive ring)
[ 12 ]
8:23 AM
Page 12
DirectLink menu only applies when you have 2 or more handsets.
Description
Adjust the ringer volume (see page 16).
Adjusting the ringer tone (see page 17).
Set the distinctive ring (see page 17). "Distinctive Ring" allows you to
preset memory locations with a designated ring tone. When an incoming call
is received and the Caller ID information matches the information in one of
the memory locations, the distinctive ring that has been stored for that
particular Caller will sound.
If you have set multiple memory locations with distinctive rings,
switching the setting to "Distinctive Off" will result in no distinctive ringing.
All incoming calls will have a normal ring tone. Switching to "Distinctive On"
will activate all programmed distinctive ring memory locations.
Advertisement
