Tyre Repair Kit - Alfa Romeo STELVIO 2022 Owner's Handbook Manual

The space-saver wheel must only be used
in the event of an emergency. Never use it
for more than strictly necessary and never
exceed 80 km/h. On the space-saver wheel
there is an orange sticker, summarising the
main warnings regarding space-saver
wheel usage restrictions. Never remove or
cover the label. Never apply any hubcap to
the space-saver wheel. The car's driving
characteristics will be modified with the
space-saver wheel fitted. Avoid violent
acceleration and braking, abrupt steering
and fast cornering. Have the wheel repaired
and refitted as soon as possible. Using two
or more space-saver spare wheel at the
same time is forbidden. Do not apply grease
to the bolt threads before fitting: they could
come unscrewed.
IMPORTANT
72) When turning the jack handle make sure
that it can turn freely without scraping
your hand against the ground. The moving
components of the jack ("worm screw"
and joints) can also cause injuries: avoid
touching them. If you come into contact
with lubricating grease, clean yourself
thoroughly.
73) Contact an Alfa Romeo Dealership
as soon as possible to have the correct
tightening of the wheel bolts checked.

TYRE REPAIR KIT

DESCRIPTION
177) 178) 179) 180) 181) 182) 183) 184) 185) 186)
74)
3)
The Tyre Repair Kit is located in the boot,
inside a dedicated container marked with
the Alfa Romeo logo.
To access the Tyre Repair Kit, open the
boot, lift the load platform.
The Tyre Repair Kit includes also:
a spray can (1) fig. 245 of sealant, with
filling : tube (2);
a compressor (4) complete with
pressure gauge, fittings and an adhesive
label (3) with the words Max. 80 km/h", to
be attached in a position easily visible to
the driver (e.g. on the dashboard) after
repairing the tyre;
some adaptors, for inflating different
elements.
245
WARNING The sealing liquid is effective
for external temperatures between -
40°F and 122°F (-40°C and +50°C). The
sealant has an expiry date.
INFLATION PROCEDURE
177) 178) 179) 180) 181) 182) 183) 187) 185) 186)
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can repair the tyre safely, as far as
possible from the side of the road;
turn on the hazard warning lights;
engage the electric parking brake;
engage P (Park) mode;
stop the engine and put on the
reflective safety jacket (for your
own safety and to comply with the
regulations in force in the country where
you are) before getting out of the car.
when the situation requires it (for
your own safety and to comply with the
regulations in force in the country where
you are), take the warning triangle from
the boot and position it at a suitable
distance from the car.
put on the gloves, connect the tube
(5) fig. 246to the spray can (1) using the
connector (6). Unscrew the tyre valve cap
and screw the filler pipe ring nut (2) onto
the tyre valve;
08066V0002EM
207