Identification of Controls
Main Unit
A blue indicator lights when the power is on
and a red indicator lights when in the
standby mode.
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to
STANDBY.
2. MENU
Press this button to access the Menu main page.
3. SOURCE
To access signal source select menu. (Not all models)
4. VOL+/-
Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
in OSD Menu, press these buttons to adjust the value or setting of each item.
5. CH+/-
Note:
Functions of VOL+/-, CH+/-, MENU, SOURCE and POWER
operation manual provides a description based on operating functions with the remote control.
7
Some models
Remote Sensor
Power Indicator
Or on some models
CH+
CH–
VOL+
VOL–
SOURCE
MENU
are also provided on the remote control. This
Channel Up/Down
Volume Up/Down
Select Input Signal (Not all models)
Menu
Power On/Standby