Setting System In Ypbpr Mode; Adjusting Phase; Adjusting Screen Aspect; Reducing Picture Noise - Sanyo AVL-278 Instruction Manual

Setting System In YPbPr (Component Video) Mode

Adjusting Phase

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
The Phase item will be highlighted automatically.
4
Press VOL+/- repeatedly to adjust the value for clearest picture.

Adjusting Screen Aspect

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
4
Press CH +/- repeatedly to highlight Aspect Ratio.
5
Press Enter repeatedly to select a desired aspect ratio.
For 480i or 480P signal format, you can select the image aspect ratio between 4:3, 16:9, Panorama
and Zoom. Use 16:9 for HDTV and most DVD titles. (Change from the factory pre-selected Panorama
setting.)
For 720P or 1080i signal format, you can select the image aspect ratio between 4:3 and16:9.
Note:
You may quickly select the screen aspect by using the Screen button on the remote

Reducing Picture Noise

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
4
Press CH+/- repeatedly to select N/R.
5
Press Enter repeatedly to select Off, Auto, Strong, Middle or Weak.

Loading Default Values

You may quickly load default values by using the Default item.
Setting System
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
(continued)
40
16:9
Auto
26