Sanyo VPC-X1200 Instruction Manual page 65

Lens
Aperture
Exposure control type
Light-measuring modes
Range
Digital zoom
Shutter speed
Sensitivity (standard
output sensitivity)
3.0× optical
zoom lens
Open F=3.1 (Wide) to 5.9 (Tele)
Programmable AE
Exposure correction available from the
Recording Menu (0±1.8EV in 0.3EV steps)
Multi-section measuring, center-weighted
measuring, spot measuring
Normal photography: 10 cm (3.94 in.) to ∞
(Wide), 60 cm (23.62 in.) to ∞ (Tele)
Macro photography: 5 cm (1.97 in.) to 80 cm
(31.50 in.) (Wide), 60 cm (23.62 in.) to 80 cm
(31.50 in.) (Tele)
For shooting: 1× to 4×
For playback: 1× to 62.5× (varies with resolution)
Single-shot mode: 1/2 to 1/1,500 sec.
(Maximum approx. 2 seconds when the
scene function is set to fireworks Hetc.)
(During flash: 1/30 to 1/1,500 sec.)
Sequential shots mode:
1/2 to 1/1,500 sec.
Video clip recording mode:
1/30 to 1/2,500 sec.
Single-shot mode/sequential shots mode
(standard output sensitivity):
Auto (ISO64 to 400)/ISO64, ISO100,
ISO200, ISO400, ISO800, ISO1600, and
ISO3200 (switchable from Recording Menu)
Video clip recording mode:
Auto (ISO384 to 2400)/ISO384, ISO600,
ISO1200, ISO2400, ISO4800
(switchable from Recording Menu)
* Sensitivity measured in compliance with
the ISO standard (ISO 12232:2006).
f=6.3 mm to 18.9 mm
(35 mm film camera
conversion: 35 mm to
105 mm)
Autofocus, 5 groups,
6 elements (4 with aspheric
surfaces)
English
56