DISASSEMBLY AND REASSEMBLY
Reattaching the Freezer Door
1) Reattach the hinge screws ( ➀ ).
3) Insert the upper hinge shaft (➃) into the hole (➄). After levelling between the hinge brackets (➅).
Reattach and close the latch (➆).
4) Connect the wires (➇) and the water tube
(➈).
Be sure to insert the water tube and push it to the end.
NOTE
2) Place the hole in the bottom of the door ( ➂ ) over
the hinge (➁).
5) Put the front part of the upper hinge cover (➉) on
the front part of the upper hinge ( ) and reattach it
from the front part of the upper hinge cover first.
6) Reattach the hinge screw ( ).
42
42
11
12