Attaching The Work Bowl Cover; Installing The Adjustable Slicing Disc - KitchenAid KFP1133 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

ATTACHING THE WORK BOWL COVER

NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl handle.
1
Grasp the feed tube and turn the
cover to the right until it locks into
place.

INSTALLING THE ADJUSTABLE SLICING DISC

Hold the slicing disc by the finger
1
grips and lower it onto the drive
adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
8 | ASSEMBLING THE FOOD PROCESSOR
W10679565B.indb 8
Fit the food pusher into the 3-in-1
feed tube. See "Using the 3-in-1 feed
2
tube" for details on working with
different sized foods.
Install the work bowl cover, being sure
2
it locks into place.
3/22/2019 4:15:56 PM