Ptp Setting Using Ap Manager - Samsung SWL-3000AP Series User Manual

4. PTP Setting Using AP Manager

① PTP stands for Point to Point, and it is used to connect two divided networks
into one using AP as Wireless Bridge. In this case, AP cannot be used for
capabilities of Access Point.
Internet Network
< Wired Network Using Hub>
② After executing AP Manager, select [Radio] tab on "Tab Bar". Select AP to set
PTP on "List Box" using mouse, and confirm setting status on [Radio]
Dialogue Box.
Confirm AP Operation Mode
(Hub)
< Point to Point Area>
X-Cable
< Wireless Network Using AP>
"Default Values"
Recommended
10
MAC ID of Wireless LAN
Card on Selected AP