Festool SYSROCK BR 10 Original Instructions Manual page 19

Disconnecting a coupled Bluetooth
device
► Press Source [j] and select a mode
other than Bluetooth
► Alternatively, press Couple [f] (~2s)
to break the connection.
If the Bluetooth ® device is disconnected
in Bluetooth ® mode, the Bluetooth
symbol on the display begins to flash
again and shows that SysRock is availa­
ble once again for a new connection.
Using a hands-free function
This SysRock can be used
as a hands-free function for
a mobile phone. If music is
played back via SysRock
and there's an incoming call to the mo­
bile phone, the music is automatically
interrupted so that you can answer the
call.
► If there's an incoming call during
the playback of music via SysRock,
briefly press the call button [c] to
answer the call.
► Speak in the direction of the internal
microphone [1-7].
Note: A very high volume in
SysRock can affect the sound
quality.
► Press call button [c] and let go in
order to end the call.
5.10 AUX input (AUX-IN)
A 3.5 mm AUX input [1-4]
is attached to the upper
part of SysRock and ena­
bles the playback of an audio signal
from an external audio device, such as
an MP3 or CD player.
► Connect a stereo or mono audio
®
► Press Source [j] in order to select
® mode.
► Set the volume on the MP3 or CD
®
5.11 Setup options
Mounting bracket [1-1]
The pushable mounting bracket allows
the device to be hung up on scaffolding
or the like.
Tripod
A standard UNC 1/4"–20 photo tripod
socket can be screwed onto the tripod
socket bushing [2-1].
6
source (such as an MP3 or CD play­
er) at the AUX input [1-4].
AUX mode.
player (max. 70%) in order to ensure
a sufficient signal, then adapt the
volume on SysRock for comfortable
listening.
Never use the AUX input in the
rain or under humid conditions, in
order to prevent moisture pene­
trating into SysRock. Keep the
rubber cover on the reverse
tightly closed in just such condi­
tions.
The mounting bracket must be
removed for operation with an ex­
ternal Festool battery pack [2A].
Service and maintenance
Customer service and re­
pairs must only be carried
out by the manufacturer
or service workshops.
English
19