Network Setup - Samsung PN50B860Y2F User Manual

Series 8 850/860 plasma tv
Hide thumbs Also See for PN50B860Y2F:
Table of Contents

Advertisement

Available languages

Available languages

Network Setup

Network Type
Select Cable or Wireless as the method to connect to the network.
The menu is activated only if the 'Samsung Wireless LAN Adapter' is connected.
N
Cable
: Connect to network using a cable.
Wireless
: Connect to network wirelessly.
Network Setup
Cable Network Setup
Please check if the LAN cable is connected.
N
Internet
Protocol Setup → Auto Setup / Manual Setup
N
etwork Test: You can test or confirm the network connection status after setting up the network.
When unable to connect to a wired network
N
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time
and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet
as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not
be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an
Internet Sharer (Router).
The internet connection may failure to a firewall problem. In this case, contact your Internet service provider. If you cannot
connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung
Electronics at 1-800-SAMSUNG.
Wireless Network Setup
The menu is activated only if the 'Samsung Wireless LAN Adapter' is connected. (See page 67)
N
Internet Protocol Setup
Network Test
When unable to connect to an AP
N
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try
again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for
the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to
the Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,
please contact a Samsung Electronics at 1-800-SAMSUNG.
Select a network
-
Access Point: You can select the IP sharer to use when using a wireless network.
If a wireless network is not in the Select a network list, press the Red button.
N
When the connection is made, you will be returned to the screen automatically.
N
If you have selected an Access Point with a security authentication:
N
The Security Key input screen appears. Enter the security key and press the Blue
button on the remote control.
If security encryption type is WEP, 0~9, A~F will be available when you input
N
security key.
▲/▼/◄/►
ENTER
Red button
Green button
Blue button
BN68-850_Eng.indb 68
(when Network Type is set to Cable)
→ Auto Setup / Manual Setup
: You can test or confirm the network connection status after setting up the network.
Button
Operations
Moves the selection up/down/left/right.
Enters (Inputs) the selected character.
Switch between Upper- and Lower-Case Letters
You can delete an already entered character.
Press this button to finish entering the security key.
English - 68
Game Mode
: Off
BD Wise
: On
Network Type
: Cable
Network Setup
V-Chip
Caption
Melody
: Medium
Energy Saving
: Off
PIP
Wireless Network Setup
_
Security Key
Number
A
B
C
D
E
F
G
0~9
Lowercase
H
I
J
K
L
M
N
Delete
O
P
Q
R
S
T
U
Done
V
W
X
Y
Z
Move
Number
Enter
n
E
R
2009-06-18
Return
3:56:05

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents