Listening Through A Receiver; Troubleshooting For Anynet - Samsung PN50B860Y2F User Manual

Series 8 850/860 plasma tv
Hide thumbs Also See for PN50B860Y2F:
Table of Contents

Advertisement

Available languages

Available languages

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the
Media Play (USB & DLNA) feature, sound may not output properly through the receiver.
N
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the
N
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 31)

Troubleshooting for Anynet

Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
BN68-850_Eng.indb 62
Receiver is set to On (by disconnecting the power cord or a power failure), the
+
Solution
Check if the device is an
Anynet
Connect only one receiver (home theater).
Check if the
Anynet
device power cord is properly connected.
+
Check the
Anynet
device's Video/Audio/HDMI 1.3 cable connections.
+
Check whether
Anynet
(HDMI-CEC) is set to On in the Anynet+ setup menu.
+
Check whether the TV remote control is in TV mode.
Check whether it is
Anynet
exclusive remote control.
+
Anynet+ doesn't work in certain situations. (Searching channels, Operating Media Play (USB
& DLNA), Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
Check if the
Anynet
Function of Anynet+ device is set on.
+
Check if the Anynet
device is properly connected to the TV and check if the Anynet
+
(HDMI-CEC) is set to On in the Anynet
Press the
TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet
menu and select a menu you want.
+
Select
View TV in the Anynet
+
Press the
SOURCE button on the TV remote control and select a device other than Anynet
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
You cannot use the play function when
Check whether or not the device supports
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether
Anynet
(HDMI-CEC) is set to On in the Anynet
+
Search
Anynet
devices again.
+
You can connect an
Anynet
device using the HDMI 1.3 cable only. Some HDMI cables may
+
not support Anynet
functions.
+
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
English - 62
View TV
Device List
Recording
DVDR MENU
DVDR INFO
Receiver
Setup
device. The Anynet
system supports Anynet
+
+
Setup menu.
+
menu.
Plug & Play is in progress.
Anynet
functions.
+
+
:
DVDR
:
On
Move
Enter
Return
U
E
R
devices only.
+
+
+
setup menu.
2009-06-18
3:55:59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents