Ad Hoc Network Setup; Network Status - Samsung ME75B User Manual

7
Network

7.1.7 Ad Hoc Network Setup

You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP
through the product.
How to set up using Ad hoc
1
Go to Network Settings
2
Select Wireless
3
Select Ad
compatible devices like a cell phone or PC. Other network services may be limited. Do you
want to change the network
4
Select OK, and press [
5
When the product finishes searching for your mobile device, input the generated
(SSID) and
7.2

Network Status

m
MENU [
You can check the current network and Internet status.
screen.
(General), and press [
hoc. The message "Ad hoc service supports a direct connection with Wi-Fi
connection?" is displayed.
]. The product searches for the mobile device.
Security Key into the device you want to connect and then connect to the network
If network does not operate normally, check the
again. An incorrect Security key
If a device is connected once, it is displayed in the Network Setting list. When you connect to
it again, you can find it in the list.
] Network Network Status
Network
Network Settings
Network Status
MagicInfo Lite Settings
The displayed image may differ depending on the model.
], then press [ ] again.
Network Name (SSID)
may cause a malfunction.
[ ]
ENTER
Network Name
and Security key
150
7 Network