Listening Through A Receiver; Troubleshooting For Anynet - Samsung LE32C650 User Manual

Series 6
Hide thumbs Also See for LE32C650:
Table of Contents

Advertisement

Advanced Features

Listening through a Receiver

¦
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the
button to exit.
EXIT
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the
OUT (OPTICAL)
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV's Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
x
You can only control Anynet
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet
x
The Anynet
functions do not operate with other manufacturers' products.
+

Troubleshooting for Anynet

¦
Problem
Anynet
does not work.
+
I want to start Anynet
.
+
I want to exit Anynet
.
+
The message "Connecting to
Anynet
device..." appears on the
+
screen.
The Anynet
device does not play.
+
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
38
English
jack of the TV.
devices using the TV remote control, not the buttons on the TV.
+
+
Possible Solution
Check if the device is an Anynet
Connect only one receiver (home theatre).
Check if the Anynet
+
Check the Anynet
device's Video/Audio/HDMI Cable connections.
+
Check whether Anynet
Check whether the TV remote control is in TV mode.
Check whether it is Anynet
Anynet
does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
+
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
Check if the Anynet
+
Check if the Anynet
+
in the Anynet
Setup menu.
+
Press the
TOOLS
button to display the Anynet
Select
View TV in the Anynet
Press the
SOURCE
button on the TV remote control and select a device other than Anynet
Press
P
>/<, PRE-CH, and
when a tuner-embedded Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet
Use the remote control when the Anynet
You cannot use the play function when
Check whether or not the device supports Anynet
Check whether or not the HDMI Cable is properly connected.
Check whether
Anynet+ (HDMI-CEC) is set to On in the Anynet
Search Anynet
devices again.
+
You can connect an Anynet
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
device. The Anynet+ system supports Anynet
+
device power cord is properly connected.
(HDMI-CEC) is set to On in the Anynet
+
exclusive remote control.
+
Function of Anynet+ device is set on.
device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On
menu and select a menu you want.
+
menu.
+
FAV.CH
to change the TV mode. (Note that the channel button operates only
setting or switching to view mode is complete.
+
Plug & Play (Initial setup) is in progress.
functions.
+
device using the HDMI Cable only. Some HDMI cables may not support Anynet
+
DIGITAL AUDIO
device.
+
devices only.
+
setup menu.
+
devices.
+
or switching to a view mode.
+
setup menu.
+
+

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents