Setting The Clock; Timer Function - Samsung AH68-02252K User Manual

Basic Functions

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
STANDBY/ON (
2. Press and hold TIMER/CLOCK button and
then press the ENTER button.
Result: "CLOCK" is displayed.
3. Press ENTER.
Result: The hour flashes.
`
Decrease the hours:
`
Increase the hours:
4. When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.
`
Decrease the minutes:
`
Increase the minutes:
5. When the correct hour is displayed, press
ENTER.
Result: "TIMER" appears in the display.
` The current time is now set.
✎
NOTE
`
You can display the time, even when you are using another
function, by pressing and hold the TIMER/CLOCK button
once.
`
You can also use [ or ] on the front panel instead of
buttons in step 3,4.
28
English
) button.
_
+
_
+

timer function

The timer enables you to switch the system on or off
at specific times automatically.
` Before setting the timer, check that the current time
is correct.
` For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
` If you no longer want the system to be switched on
or off automatically, you must cancel the timer.
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the
STANDBY/ON (
2. Press and hold the TIMER/CLOCK button and
then press _ or + buttons until TIMER is
displayed.
3.
Press the ENTER (
Result: ON TIME is displayed for a few seconds,
followed by any switch-on time already set; you can
set the timer switch-on time.
4. Set the timer switch-on time.
Press the _ or + button.
a
b Press the ENTER (
Result: The minutes flash.
Press the _ or + button.
c
d Press the ENTER (
Result: OFF TIME is displayed for a few seconds,
followed by any switch-off time already set;
you can now set the timer switch-off time.
5. Set the timer switch-off time.
Press the _ or + button.
a
Press the ENTER (
b
Result: The minutes flash.
Press the _ or + button.
c
d Press the ENTER (
Result: VOL XX is displayed, where XX
corresponds to the volume already set.
6. Press button to adjust the volume level
_ or +
and press the ENTER (
Result: The source to be selected is displayed.
7. Press the _ or + button to select the desired
source to be played when the system switches on.
` FM (radio) : a Press the ENTER (
b Select a preset station by press
` DVD/CD (compact disc):
discs.
` TAPE(cassette): insert a cassette tape.
` USB: Connect the USB device.
) button.
) button.
) button.
) button.
) button.
) button.
) button.
) button.
the _ or + button .
Load one or more compact