Basic Functions
Listening to radio
Using buttons on the Remote Control
1.
Press the
FUNCTION button to select FM
band.
2.
Tune in to the desired station.
Automatic Tuning 1
•
MODE button to select PRESET and then press
TUNING (
) buttons to select the preset
station.
•
Automatic Tuning 2
MODE button to select AUTO and then press
and hold the TUNING (
automatically search for active broadcasting
stations.
Manual Tuning
: Press the TUNING MODE
•
button to select MANUAL and then briefly
press the TUNING (
decrease the frequency incrementally.
Using buttons on the product
1.
Press the
TUNER button to select FM band.
2.
Select a broadcast station.
Automatic Tuning 1
•
button to select PRESET and then press the
[ ] buttons to select the preset station.
•
Automatic Tuning 2
button to select AUTO and then press and hold
the [ ] buttons to automatically search the
band.
Manual Tuning
: Press the STOP ( @ ) button
•
to select MANUAL and then press the [ ]
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the sound
•
switches between STEREO and MONO.
•
In a poor reception area, select
interference-free broadcast.
✎
NOTE
`
This applies only when listening to an FM
station.
26
English
: Press the TUNING
: Press the TUNING
) button to
) button to increase or
: Press the STOP ( @ )
: Press the STOP ( @ )
MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.
Press the
FUNCTION button to select FM.
2.
Press the
STOP ( @ ) button on the front panel to
select <MANUAL> mode.
3.
Press the
TUNING (
<89.10>.
4.
Press the
ENTER button.
Number flashes on the display.
•
5.
Press the
[ ] buttons on the front panel to
select preset number.
You can select between 1 and 15 presets.
•
6.
Press the
ENTER button again.
Press the
ENTER button before number
•
disappears from the display.
Number disappears from the display and the
•
station is stored in memory.
7.
To preset another station, repeat steps 2 to 5.
•
To tune in to a preset station, press the
TUNING (
) buttons on the remote control to
select a channel.
) button to select