Setting The Flash - Samsung VP-MS15 Owner's Instruction Manual

Photo Mode : Setting the Capturing Options

Setting the Flash

Flash is very useful not only for brighter subjects at night, but also in daytime when there is not
enough lighting on the subject, such as in a shadow, indoors, and in backlight situations.
1. Turn the Mode Dial to
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
N
Menu screen appears.
4. Move the joystick left / right to select <Flash>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
Off Flash will go off. Select this option when flash use is limited such as in a museum.
Auto Flash will be set automatically according to lighting conditions.
Red-eye Flash will be set automatically according to lighting conditions, with red-eye reduction.
Fill-in Forces the flash to go on despite the lighting conditions.
To have a brighter subject and scene (backdrop), the Miniket Photo will first allow longer exposure
Slow Sync.
and then throws the flash on the subject. It is recommended to use a tripod to avoid blurred images.
6. Press the [MENU] button to exit the menu.
[ Notes ]
✤
You can easily access this function by using the shortcut button (refer to page 58).
✤
Regarding Flash setting in Scene modes, refer to page 72.
✤
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
✤
When the flash is set, it fires twice (once for metering and once for capturing) to make the best result.
Photo mode.
ENGLISH
23
23
3 23
IN
23 23
2592
Photo
Flash
Photo
4
Flash
Photo Photo
Photo
Flash Flash
Move Select Exit
Off
Flash
Auto
Red-eye
Move Select Exit
Fill-in
Photo
Move Move OK Select Select MENU Exit Exit
Move Select Exit
5
Photo Photo Flash
Photo Flash Flash
Off
Photo
Auto
Flash
Red-eye
Move Select Exit
Fill-in
Flash
Move Move OK Select Select MENU Exit Exit
6
23 IN
23
Move Select Exit
2592
23
Move Select Exit
23
23
71 71