Troubleshooting; Self-Diagnosis Display; Checklist - Samsung VP-MS15 Owner's Instruction Manual

Troubleshooting : Self-Diagnosis Display

Self-Diagnosis Display

Display
Memory Full! Not enough free space for saving files.
Paper Error! The paper is not inserted or set improperly.
Print Error! Paper jam or other printing error occurred.
Ink Error! Ink is low.
Connect USB Cable! USB cable is not connected or set improperly.
Low Battery! Battery Power is low.
Card Error The mini SD card is not inserted or damaged.
Not formatted! The mini SD card is not formatted.
Write Error! Failed to write a file.
Read Error! Failed to read a file.
Protect! The file is protected.

Checklist

✤ Before contacting service personnel, please read and check following table. If the problem continues, contact your nearest
Samsung dealer or authorised service centre / personnel.
Symptom
No Power is supplied.
Date / Time is wrong
Focus does not adjust automatically
The mini SD card will not load properly.
Colour balance of the picture is not natural.
Digital zoom does not work.
Files stored in the mini SD card can not be
deleted.
Informs that...
Possible Causes
The power is not connected properly.
The battery is dead.
The battery is too cold.
The Date / Time is not set.
Focus mode is set to manual.
Recording was done in a too-dark place.
Lens is covered with condensation.
The mini SD card is inserted improperly.
Foreign substances are in the memory slot.
White balance setting is not suitable for the
recording situation.
The digital effect is set enabled.
Mini SD card is protected.
The file is protected.
Check the space of internal memory or the external memory.
Check the paper in the printer. If there is no paper, insert paper.
Check the printer message. Refer to the printer manual for details.
Replace ink or toner.
Check the USB connection. Disconnect and try to connect again.
Charge the Battery Pack or connect the AC Power Adapter.
Replace the mini SD card.
Format the mini SD card or replace with a formatted one.
Check the memory space or format of the mini SD card.
Delete the damaged / corrupted file.
To delete a protected file, unlock the protection prior to deletion.
Connect the AC Power Adapter properly, page 24
Replace with a new Battery Pack.
Warm up the battery or move it to a warmer place.
Set the Date / Time, pages 42
Set the focus mode to <Auto>.
Use a strobe or light the place.
Clear the lens and check the focus.
Insert the mini SD card properly, page 33.
Clear the memory slot.
Set proper white balance, page 69.
Turn off the Digital Effects, page 66.
Release the mini SD card protection tab.
Unlock the protection of the file, page 84.
ENGLISH
Action
Measure
147 147