Filter Maintenance; Replace Pre-Filter; Replace Hepa Filter; Filter Ordering - Hunter ExtremeAir HPF500 Quick Start Manual

Replace Pre-Filter

Remove any packaging and plastic bag from the new filter before replacement.
1. Switch off and disconnect air purifier from supply socket.
2. Place hands on both sides of blade & twist counter-clockwise to remove blade.
3. Gently pull tabs on top of filters to remove from base of air purifier.
4. Remove pre-filters from each HEPA filter by gently pulling away from Velcro.
5. Align new pre-filters with each HEPA filter and firmly press to attach.
6. Slide filters back in compartment of base, tab side facing up.
7. Place blade back on base. Align tabs, then twist clockwise to lock into place.
8. Dispose of dirty filter.

Replace HEPA Filter

Remove any packaging and plastic bag from the new filter before
replacement.
1. Switch off and disconnect air purifier from supply socket.
2. Place hands on both sides of blade & twist counter-clockwise to remove blade.
3. Gently pull tabs on top of filters to remove from base of air purifier.
4. Remove pre-filters from each HEPA filter by gently pulling away from Velcro.
5. Align pre-filters with each new HEPA filter and firmly press to attach.
6. Slide filters back in compartment of base, tab side facing up.
7. Place blade back on base. Alight tabs, then twist clockwise to lock into place.
8. Dispose of dirty filter.
Replacement filters may be ordered online at www.hunterpureair.com or by phone
by calling Hunter Customer Support at (855) 887-1440. Applicable state and local
®
taxes may apply. Prices are subject to change without notice.
Air Purifier Model
*Air purifier uses (2) HEPA/Photocatalyst Filters and (2) Pre-Filters at the same time.

Filter Maintenance

Filter Ordering

HPF500 Pre-Filter, 4-Pack
2 HEPA & Photocatalyst,
HPF500
& 4 Pre-Filters
Type Part Number
H-PF500
H-HF500-VP
10