What To Do If; Remedying Faults - AEG KO-LAMAVAT 76730 User Information

Operating Instructions

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
• If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below).
When you have remedied the fault, press the
START/PAUSE button.
• With all other displayed faults (E plus number or letter): switch appli-
ance off and on again. Reset the wash programme and press the
START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service
department quoting the fault code.
Problem
The washing machine
does not work.
The filling door cannot
be closed.
Fault code
pears. The indicator
MAIN WASH flashes.
32
The mains plug is not
plugged in.
The fuse of the building's
wiring is not in order.
The filling door is not cor-
rectly closed.
The button START/PAUSE
was not pressed for long
enough.
The child safety feature is
set.
E40
ap-
The filling door is not
correctly closed.
Possible Cause Remedy
Plug in the mains plug.
Replace the fuse.
Close the filling door; the
lock must engage audibly.
Press the button START/
PAUSE until the program be-
gins.
Cancel the child safety fea-
ture (see section "Child
Safety Feature").
Close the filling door cor-
rectly. Restart the program.