Behringer X32 User Manual page 10

10
X32 COMPACT DIGITAL MIXER User Manual
LeOnde.mp3
00.05.00 00.00.00
con g
home
Bus Con guration
clip
-6
-12
-18
Link
-24
-30
-36
-42
-48
-54
Gain
00.00 dB
Link
The con guration of Mix Bus Channels 1-16 can be pre-set (in the Setup/Global
page) or can also be con gured on an individual, per-channel basis. The bus
processing includes (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
6-band fully parametric EQ
Compressor/expander (swappable between post-EQ and pre-EQ operation)
Bus sends to 6 matrices
Main LR panning
Mono/Center level
Main Bus Channels LR/C are always available and independent from Mix Buses.
The processing steps for this signal path include (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
6-band fully parametric EQ
Compressor/expander (swappable between post-EQ and pre-EQ operation)
Bus sends to 6 matrices
13:44:43
29 November 2010
gate dyn eq
Bus Insert Position
∑
Channel Sends
Pre
All Channel Sends
Pre Con guration
...
Inputs
Pre EQ
Pre Fader
Post Fader
Sub Grou
Send Pos.
Inputs
Bus Sends
MyProj.prj
Scene01
sends main
Insert Post
Insert
Ins 01
Ins 02
Ins 03
Ins 04
...
FX 01
FX 02
Insert Pos. Insert
Pre
Insert Connect
Matrix Channels 1-6 are fed exclusively by MAIN LRC and Mix Bus 1-16 signals.
The processing steps include (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
6-band fully parametric EQ
Compressor/expander (swappable between post-EQ and pre-EQ operation)
E ects Processing 1-8
The X32 COMPACT console contains eight true-stereo internal e ects engines.
FX 1-4 can be con gured as side chain or insert e ects, while FX 5-8 can only
be used in insert points of channels or buses
The returns of side chain FX 1-4 can always be controlled using the 6th bank
(layer) of the input channels - E ects Returns. Note that the return signals of
FX 1-4 have separate faders for left and right
The FX Home screen allows selection of the FX 1-4 input sources and selecting
the e ects type/algorithm for each of the 8 FX slots of the virtual rack
The subsequent tabs FX 1-FX 8 of the FX screen allow editing all parameters
of the chosen e ects processor