Samsung SyncMaster 757MB Owner's Manual page 13

Unpacking
Front
Rear
Bottom
1. Power port
2. Signal port
3. BNC Connectors
(Option)
4. USB Connector
Note: See
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the 15-pin D-sub connector on the back of
your monitor.
Connect the signal cable to the BNC signal port on the back of your
monitor.
Connect the USB cable to the USB port on the back of your monitor.
Connecting Your Monitor
SyncMaster 957MB
for further information regarding cable connections.
Main > Introduction > Rear