Table of Contents
Advertisement
Service Notes
About This Manual
This manual provides service and repair procedures for Meritor
MTC-4208X/XL/XP/XLEV/XLEC, MTC-4210X/XL/XP/XLEV/XLEC,
and MTC-4213X transfer cases.
Transfer Case Interchangeability
The MTC-4208XL/XLEV/XLEC and MTC-4210XL/XLEV/XLEC
transfer case models are directly interchangeable with MTC-
4208XL and MTC-4210XL transfer case specifications.
Interface points for the oil cooler inlet and outlet lines (if equipped)
on the XL, XLEV, and XLEC models are different from the X and
XP, which affect the lengths of the oil cooler lines. The exterior
geometry of the housing and location of lubrication lines also
change, which potentially impacts clearances to surrounding
components. In addition, GS models cannot be used in place of
the X models in applications with "engage-on-the-fly" systems or
mid-ship pumps.
The MTC-4208XP, MTC-4210XP, and MTC-4213X transfer case
models are backward-compatible with MTC-4208GS, MTC-
4210GS, and MTC-4213GS transfer case specifications.
There are no changes to the oil cooler interface points with these
models.
For more information on MTC-4208, MTC-4210, and MTC-
4213GS Series transfer cases, refer to Maintenance Manual MM-
0146 - Transfer Cases. To obtain this publication, visit Literature on
Demand at meritor.com.
How to Obtain Additional Maintenance
and Service Information
Visit Literature on Demand at meritor.com to access and order
additional information. Additional information is also available at
meritorbullpen.com.
Contact the OnTrac™ Customer Call Center at 866-668-7221
(United States and Canada); 001-800-889-1834 (Mexico); or
email OnTrac@meritor.com.
If Parts, Tools, and Supplies are
Specified in this Manual
Contact Meritor's Commercial Vehicle Aftermarket at 888-725-
9355.
For assistance with parts, you may also contact the Meritor Parts
Center in Florence, KY at CustCareCntr.Florence@Meritor.com or
859-525-3500.
Information contained in this publication was in effect at the
time the publication was approved for printing and is subject to
change without notice or liability. Meritor Heavy Vehicle Systems,
LLC, reserves the right to revise the information presented or to
discontinue the production of parts described at any time.
Advertisement
Table of Contents
