What To Do If; Trouble Shooting - AEG OKO-LAVAMAT 88730 User Information

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following
checks before contacting your local Service Force Centre. Important: If
you call out an engineer to a fault listed below or to repair a fault
caused by incorrect use or installation, a charge will be made even if
the appliance is in guarantee.
• If the fault code C1 oder C2 is shown in the
multi-display, you may be able to remedy
the fault yourself (see the Fault table be-
low).
After clearing the fault, press the START/PAUSE button. If the fault
code is shown again, contact your local Service Force Centre.
• For all other faults displayed in the multi-display, please contact your
local AEG Service Force Centre, stating the fault code.
Problem
The washing machine
does not work.
The door cannot be
closed.
Water is not running.
(1
Error code
pears.
Possible Cause
The mains plug is not
plugged in.
The house fuse has blown.
The door is not correctly
closed.
START/PAUSE button not
pressed long enough.
The child safety feature is set
Water tap closed.
Filter in screw connection of
ap- the inlet hose is blocked.
Water tap is blocked with
limescale or is faulty.
Operating Instructions
Remedy
Plug in the mains plug.
Replace the fuse.
Close the door; The lock must
engage audibly.
Keep the START/PAUSE but-
ton pressed until the pro-
gramme begins.
Cancel the child safety fea-
ture (see Section "Child
Safety Feature").
Open the water tap.
Close the water tap. Unscrew
the hose from the tap, re-
move the filter and clean un-
der running water
Check water tap and have it
repaired if necessary.
31