If The Washing Results Are Not Satisfactory - AEG OKO-LAVAMAT 88730 User Information

Operating Instructions
Problem
When pressing a pro-
gramme option button
the corresponding dis-
play does not light up.
The programme
progress indicator
flashes constantly.

If the washing results are not satisfactory

If the washing turns greyish and limescale deposits are present in
the drum
• Insufficient detergent has been added.
• Incorrect detergent was used.
• Stains were not pre-treated.
• Programme or temperature was not set correctly.
• If using modular detergents, the individual components were not
used in the correct ratio.
If there are still grey stains on the washing
• Soiled garments with ointments, grease or oils were washed with in-
sufficient detergent.
• The temperature selected for the wash was too low.
• A frequent cause is that fabric softener - particularly a concentrated
one - has come into contact with the washing. Wash out these types
of stains as soon as possible and use the fabric softener carefully.
If after the last rinse foam is still visible
• Modern detergents can still cause foam in the final rinse cycle. How-
ever, the washing is still sufficiently rinsed.
If there are white residues on the washing
• These are insoluble contents of modern detergents. They are not the
result of an insufficient rinse. Shake out the washing or brush it off.
Turn the washing inside out before washing it. Review your choice of
detergent and if necessary use liquid detergent.
34
Possible Cause
The selected programme op-
tion cannot be combined
with the set programme.
Programme safeguard
switched on; The pro-
gramme selector was acci-
dentally moved during the
washing cycle.
Remedy
Make another selection.
Turn the programme selec-
tor back to the original posi-
tion (see "Programme
protection").