Table of Contents
Advertisement
•
Frames: apply a decorative frame.
•
Flash: use one of the following flash options:
Off: turn off the flash.
Shooting only: turn the flash on for the current
shot. After you take a photo, the flash turns off.
Permanent: use the flash when you take a photo.
•
Timer: set a time delay before the camera takes a
photo.
•
Brightness: adjust the image brightness.
•
My photos: display the photos stored in the
Photos folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality.
Viewfinder: select a preview mode, Full screen
or Standard ratio.
Shutter sound: select the sound that you hear
when you press the shutter,
Multishot speed: select the multi-shot speed.
•
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
.
Default name: change the default prefix of the
file name.
Short cuts: show you the functions of the keys
you can use.
Key
Function
Flips the image vertically.
Shows the mirror image.
/
Adjusts the brightness of the image.
/
Zooms in or out.
1
Switches to Record mode.
2
Changes the image size.
3
Changes the image quality.
4
Changes the camera mode.
p. 72
71
Advertisement
Table of Contents
