Table of Contents
Advertisement
Blower & Collector Removal
1. Remove the knobs (A, Figure 27) securing the
deck guard top (B) to the deck guard.
2. Pull the blower idler arm lever (C) forward to
release the belt tension and remove the belt from
the spindle pulley.
3. Reinstall the deck guard top and secure with the
knobs.
4. Loosen the lower clamp securing the hose to
the blower outlet and remove the hose from the
blower. See Figure 28.
5. Pull the quick pins on the blower mount and
remove the blower from the mower deck.
6. Reinstall the discharge chute (A, Figure 29),
torsion spring (B), 5/16" fender washer (C), spring
spacer (D) and secure with the supplied quick
attach rod (E) and hairpin clips (F).
7. Empty the grass collector bags and reinstall in the
bagger frame.
8. Remove the hitch pin (A, Figure 30) and hair pin
clip (B) securing the mount frame (C) to the mount
plate.
9. Lift the bagger unit up and off of the mount plate.
Figure 27. Remove Belt
A. Knob
B. Deck Guard Top
C. Idler Arm Lever
A
B
A
C
BLOWER COLLECTOR & REMOVAL
A
Figure 28. Remove Hose
A. Lower Clamp
F
B
C
A
Figure 29. Reinstall Discharge Chute
A. Discharge Chute
B. Torsion Spring
C. 5/16" Fender Washer
D. Spring Spacer
E. Quick Attach Rod
F. Hairpin Clip
B
Figure 30. Remove Hitch Pins
A. Hitch Pin
B. Hair Pin Clip
C. Mount Frame
E
D
B
A
19
Advertisement
Table of Contents
