Basic Operations; Playing The Keyboard; Selecting A Tone - Casio CTK-1100 User Manual

Basic Operations

POWER/MODE
MAIN VOLUME
This section provides information on performing basic
keyboard operations.

Playing the Keyboard

To play the keyboard
1
Set the POWER/MODE switch to NORMAL.
2
Use the MAIN VOLUME slider to lower the
keyboard volume.
• It's always a good idea to set the keyboard volume at
a relatively low level before playing.
3
Play something on the keyboard.

Selecting a Tone

This keyboard comes with 100 built-in tones. Use the
following procedure to select the tone you want to use.
To select a tone
1
Find the tone you want to use in the TONE List and
note its tone number.
• Not all of the available tones are shown on the tone
list printed on the keyboard console. For a complete
list, see the "Tone List" on page A-1.
2
Press the TONE button.
Appears when TONE button is pressed
TONE
3
Use the number buttons to input the two digit tone
number for the tone you want to select.
Example: To select "26", input 2 and then 6 .
NOTE
• Always input both digits for the tone number, including
a leading zero (if any). If you input one digit and stop,
the display will automatically clear your input after a few
seconds.
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
Number buttons
E-15