Operation
1. "
" switch
2. "
" switch
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the
"
" switch.
NOTE:
The trolling speed changes approximately
G
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
G
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27820
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27845
Procedure
1.
Push and hold the engine stop button or
turn the main switch to "
52
"
2.
3.
" (off).
After stopping the engine, disconnect
the fuel line if there is a fuel joint on the
outboard motor.
Tighten the air vent screw on the fuel
tank cap (if equipped).
ZMU03632