Parameter List; System Parameters; System Information Parameter - Casio AP-200 Manual

Part V

Parameter List

How to Read the Tables
Number Base Notation
"Size" indicates the parameter value bit width as a decimal value.
The bit field position of "Block" as a decimal value.
Values used in the explanations under "Description" are all decimal values, unless specified otherwise.
Values other than those described above are all hexadecimal.
R/W Field
The R/W field indicates whether an IPR (Individual Parameter Request) read operation or IPS (Individual Parameter Send)
write operation is enabled.
18

System Parameters

These parameters make it possible for an external device to check the status of the Instrument and for an external device
to command some operation of the Instrument.
18.1

System Information Parameter

This parameter is a container for system information.
Parameter
Model
Version
Internal Timestamp
External Timestamp
ID R/W Block
0000 R 000000
0001 R 000000
0002 R/W 000000
0003 R/W 000000
Size Array Min-Def-Max Description
7 01 00-00-7F
7 01 00-00-7F
7 10 00-20-7F
7 10 00-20-7F
33
0...reserved
1...PX-200/PX-320
2...PX-800
3...AP-500
4...PX-120
5...PX-720/AP-200/
AP-400
Version Number
Ascii Character
Ascii Character