Connection Example; Connecting The Vs-2400Cd And An Adat Device - Roland DIF-AT24 Owner's Manual

Connections and settings
Connection

Connecting the VS-2400CD and an ADAT device

example 3
This example allows digital audio signals to be transferred. Make connections as shown in
the diagram.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
ADAT device
DIF-AT24
Settings
Sampling Frequency settings
Set the sampling frequency of the VS-2400CD and ADAT device to the same setting
(44.1 kHz or 48 kHz).
Master Clock settings
Master clock device
VS-2400CD
ADAT device
You'll also need to set the Master Clock for the ADAT device. For details on this setting, refer to the owner's
manual for the ADAT device.
12
ADAT OPTICAL IN
ADAT OUT
R-BUS
VS-2400CD setting
PROJECT PARAMETER screen
MASTER CLOCL ................INT
PROJECT PARAMETER screen
MASTER CLOCL ................R-BUS
ADAT OPTICAL OUT
ADAT IN
R-BUS
VS-2400CD
DIF-AT24
MASTER CLK switch
R-BUS
ADAT