Connection Example; Connecting The Vs-2400Cd And A Computer - Roland DIF-AT24 Owner's Manual

Connections and settings
Connection

Connecting the VS-2400CD and a computer

example 2
Here's an example of synchronization with computer-based sequencer software or the
VS-2400CD functioning as the master.
Make connections as shown in the diagram. This example uses an ADAT interface and MIDI
interface connected to your computer.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
VS-2400CD
10
PC
USB connector
Edirol UM-1, etc.
MIDI IN MIDI OUT
MIDI OUT
interface
ADAT
OPTICAL IN
ADAT
MIDI IN
OUT
R-BUS
ADAT
ADAT
OPTICAL OUT
ADAT IN
DIF-AT24
R-BUS