System Parameters - Roland PhraseLab MC-09 Owner's Manual

System parameters

fig.99-1
Operation
Setup
Parameter Display
Transpose
Tuning
Sync mode
Sync out
MIDI channel
Device ID
Soft thru
Local switch
Receive program
change
Receive control
change
Receive pitch bend
Receive system ex-
clusive
Transmit program
change
Bulk dump
Bulk load
Loop load
Loop save
Loop delete
All load
All save
All delete
Card format
Factory reset
Select the parameter
Range
-12–12
427.4–452.6 (Hz)
INT, SLAVE,
REMOTE
OFF, ON
1–16, OFF
17–32
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
PTN, PRC, ALL
—
—
—
—
—
—
—
—
—
Decide the parameter
Parameter function
Transposes
Adjusts the tuning
Specifies the tempo reference for synchronization
Specifies whether synchronization-related MIDI messages will be transmitted
Specifies the MIDI channel. Set this to OFF if you don't want MIDI messages to
be transmitted or received
Specifies the device ID
Specifies whether received MIDI messages will be retransmitted from the MIDI
OUT connector
Specifies whether the controller section will transmit MIDI messages to the DSP
synthesizer section
Specifies whether program changes will be received
Specifies whether control change messages will be received
Specifies whether pitch bend messages will be received
Specifies whether system exclusive messages will be received
Specifies whether program change messages will be transmitted
Transmits the currently selected pattern and process patch, or all patterns, pro-
cess patches, and system settings
Load bulk data
Load a loop from a memory card into the audio looper
Save a loop to memory card
Delete a loop from memory card
Load all loops and internal settings into the MC-09
Save all loops and internal settings to a memory card
Delete all loops and internal settings from the memory card
Format a memory card for use by the MC-09
Return the MC-09 to the factory-set condition
Parameter list
Setting End the setting
71