Table of Contents
Advertisement
Symptom
The recorded image is out
of focus.
Power failure during self-
timer operation
Monitor screen image is out
of focus.
Poor color and brightness
when indoors
Cannot perform movie re-
cording.
Recorded image is not
saved.
Colors of recorded image
are different from those on
the display when image was
composed.
TROUBLESHOOTING
TROUBLESHOOTING
Probable Cause
The focus setting is not correct.
Low battery power
1. Failure to focus the image while the camera is in
the Manual Mode.
2. Camera is in the Macro Mode.
3. Camera is in the Auto Focus Mode while the sub-
ject is too close.
Indoor fluorescent lighting
1. Movie Record Mode is not selected.
2. Insufficient camera memory capacity.
1. Loss of power before image is stored in memory
2. Memory card cover was opened before the im-
age was fully saved.
1. Reflection from sunlight or light from another
source
2. Image quality setting
Make sure the subject you want to focus is within
the Auto Focus Frame when you record the image.
Replace all four batteries with a set of new ones
(page E-38).
1. Focus the image before recording it.
2. Use the Auto Focus Mode for scenery and group
shots.
3. Use the Macro Mode when the subject is too
close for Auto Focus.
Shoot under incandescent or other non-fluorescent
lighting (page E-48).
1. Select the Movie Record Mode (page E-61).
2. Delete images you no longer need from camera
memory.
1. Replace all four batteries with a set of new ones
(page E-38).
2. Never open the memory card cover until the im-
age is fully saved.
1. Reorient the camera so that light is not shining
directly into lens.
2. Use the Recording Menu to change to a higher
image quality for recording.
E-113
Action
Advertisement
Table of Contents
