RIDGID BS1400 Operator's Manual page 17

18. On-Off Switch
WARNING: Before turning switch "ON", make sure
the blade guards are correctly installed and operating
properly.
The On-Off switch has a locking feature. This feature is
intended to help prevent unauthorized and possible
hazardous use by children and others.
1. To turn band saw "On" insert key into switch.
NOTE: Key is made of yellow plastic, located in the
loose parts bag.
2. Insert finger under switch lever and Pull end of
switch out.
3. To turn band saw "Off" Push lever in.
WARNING: Never leave the band saw unattended
until it has come to a complete stop.
4. To lock switch in "Off" position hold switch in with
one hand and remove key with other hand.
WARNING: For your own safety, always lock the
switch "Off" when band saw is not in use, remove the
key and keep it in a safe place. In the event of a power
failure (all of your lights go out) turn switch off, remove
the key and store it away from the band saw. This will
prevent the machine from starting up again when the
power comes back on.
17