Preparing For Use - Philips AVENT SCF330 Manual

Caution
The breast pump is only intended for repeated use by a single user.
Never drop or insert any foreign object into any opening.
Never use any accessories or parts from other manufacturers or that Philips AVENT does
invalid.
Do not use antibacterial or abrasive cleaning agents when you clean breast pump parts.
expressing any milk.
If the pressure generated is uncomfortable or causes pain, break the seal between the breast

Preparing for use

sterilising'. Clean all parts after each subsequent use and sterilise all parts before each subsequent use.
Note: Make sure you have cleaned and sterilised all parts of the breast pump. Wash your hands
thoroughly before you handle the cleaned parts.
Be careful, the cleaned parts may still be hot.
1 Insert the white valve into the pump body from underneath. Push in the valve as far as
possible (Fig. 2).
2 Screw the pump body clockwise onto the bottle or storage cup until it is securely
3
4 Attach the handle onto the diaphragm with stem by hooking the hole in the handle over the
end of the stem. Push down the handle onto the pump body until it clicks into place (Fig. 5).
5 Place the massage cushion into the funnel-shaped section of the pump body. Push in the inner
part of the massage cushion as far as possible and make sure that it is perfectly sealed all
around the rim of the pump body. Press in between the petals to remove any trapped
air (Fig. 6).
expressing.
ENGLISH
7