Using The Infinity Mode; Using The Manual Focus Mode - Casio QV-2300UX User Manual

Using the Infinity Mode

The Infinity Mode sets the focus near infinity. It is a good
choice for scenery and other far-off subjects. Focus adjust-
ment starts automatically whenever you press the shutter
release button about half way down.
1.
Press to cycle through the focus
mode settings until the
on the display. This indicates the Infinity
Mode.
2.
Compose the image and record it.
• See "Using the Auto Focus Mode" on page E-55 for
information about how the camera focuses an image
automatically.
• You can check the current status by looking at the op-
eration lamp and focus frame. See "Using the Auto
Focus Mode" on page E-55 for more information.
BASIC IMAGE RECORDING
indicator appears
E-57

Using the Manual Focus Mode

With Manual Focus, you make the required focus settings by
hand. The following shows the relationship between optical
zoom factor and the focusing distance for the Manual Focus
Mode.
Optical Zoom Factor
1X
QV-2300UX
3X
1X
QV-2800UX
8X
1.
Press to cycle through the focus
mode settings until the
flashing on the display. This indicates the
Manual Focus Mode.
2.
While the indicator is flashing, use [+] and
[–] to focus the image.
• If you do not perform any focus operation for about
two seconds, the
• You can press
on the monitor screen to change to another focus
mode, if you want.
Focusing Distance
1cm to
50cm to
1cm to
1m to
indicator appears
indicator stops flashing.
while the indicator is