Table of Contents
Advertisement
Using the Flash
The following describes various flash settings you can make
to suit the type of image you are trying to record.
1.
Enter the REC mode.
2.
Press
to cycle
through the available
flash modes until the
indicator for the one
you want is on the
monitor screen.
Flash
mode
BASIC IMAGE RECORDING
SHIFT
MF
INFO
E-52
• Each press of
cycles through the available flash
modes described below.
To do this
Have the flash fire automatically
when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye Reduction)
Select this setting
No display
Advertisement
Table of Contents
