Table of Contents
Advertisement
• You can find out the
status of the Auto Focus
operation by checking the
color of the focus frame
and the status of the
operation lamp.
If you see this
Green focus frame and green
operation lamp
Red focus frame and red
operation lamp
• Take care that you do not
block the lens or the
sensors with your fingers
as you hold the camera.
6.
After confirming that
the image is in focus,
press the shutter
release button all the
way down to record the
image.
BASIC IMAGE RECORDING
SHIFT
MF
INFO
Operation lamp
It means this
The image is in focus.
The image is not in focus.
E-48
• Recorded images are temporarily stored in a buffer,
from which they are stored to the memory card in-
stalled in the camera. You can continue to store im-
ages as long as there is space available in the buffer.
• The number of images you can store in the camera
depends on the storage medium and the image quality
setting (page E-59) you are using.
• To avoid hand movement, press the shutter release
button gently.
• Use of a tripod is recommended for slow shutter
speeds and telephoto shots to avoid blurring of the
image due to camera movement.
Camera Shake Indicator
The
(camera shake indicator) appears on the monitor
screen when the zoom slider is set to T (telephoto) or when a
slow shutter speed is being used.
• If the camera shake indicator
the wired remote controller to avoid camera movement.
appears, use a tripod and
Advertisement
Table of Contents
