Casio IT-9000 Series Service Manual page 87

Hide thumbs Also See for IT-9000 Series:
Table of Contents

Advertisement

[ Notes on reassembling ]
(1) Pass the LNA-PW-CABLE through the hole in the WAN antenna.
(2) When replacing the WAN antenna, stick the GSM-SPACER.
[ Notes on reassembling ]
There are two types of WAN/GPS-MODULE as follows.
WAN/GPS-MODULE
MC8795V
MC8092
MC8795V
MC8092
Since the MC8092 module has three identical connectors, connect the following two cables.
Main Connector: Antenna Cable
GPS Connector: GPS Cable
If the GPS cable is connected to the Div connector by mistake;
• GPS does not work.
• When GPS test is done (P62), the test result is found to be NG. In this case, check the GPS
cable connection and connect it correctly.
WAN ANTENNA
WAN/GPS-MODULE, GPS CABLE
Model-A
Model-B, Model-C
GPS CABLE
GPS CABLE
– 80 –
GSM-SPACER
Model Type
Antenna Cable
Antenna Cable
IT-9000

Advertisement

Table of Contents
loading

Table of Contents