Beko DCU 7230 Manual page 32

Auxiliary function
Cancel audio warning
want to hear the audio warning, press "Cancel
Audio Warning" button. The relevant light
will turn on when this button is pressed and
an audio warning will not be given when the
programme comes to an end.
C
after the programme starts.
Warning indicators
C
Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
continuously, please refer to, "Suggested
solutions for problems".
Water tank
Warning light starts flashing when the tank is
filled with water. The dryer stops operating if
the warning light turns on when a programme
is running. Drain the water in the water tank
Cancel" button to start the programme after
you have emptied the water tank. The warning
light turns off and the programme resumes
operating.
Time delay
thanks to the time delay function, you can
delay the program start up to 3 hours, 6 hours
or 9 hours.
in.
C
filter is cleaned and the water tank is empty.
2. Set the drying program and, if required, the
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the same
button is pressed again, 6 hours; and if
pressed once more, 9 hours delay will be
is pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected program
Cancel" button after selecting the time
delay.
C
Additional laundry may be loaded / taken
out during the time delay period.
C
During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes
to prevent creasing.
Canceling the time delay
about 3 seconds.
the program right away.
Starting the programme
the programme.
turn on to indicate that the programme has
started.
Progress of program
At the beginning of every program step, the relevant
step will turn off.
"Drying":
whole drying process until the drying degree
reaches "iron dry".
"Iron Dry":
degree reaches "iron dry" step and remains
"Cupboard dry":
Starts to illuminate when the drying degree
reaches "Ready to wear" step and remains
"Final / Anti-creasing":
C
flash concurrently, it means there is
malfunctioning or a failure (please see,
Changing the programme after it has
started
under higher or lower temperatures after your
dryer has started.
button for about 3 seconds to "Cancel"
programme.
rotating the programme selection button.
the programme.
C
3 seconds to cancel the programme or
turn the programme selection knob in any
direction to end the programme while the
machine is running. Water tank and filter
cleaning warning lights turn on to warn the
user when the programme is cancelled by
32 EN