Preparing Laundry For Drying; Correct Load Capacity - Beko DCU 7230 Manual

alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty of
detergent before being dried in the dryer.
reinforcement and rubber foam pads should
not be dried in the dryer.
products unless they are recommended by
the manufacturers of the fabric softener or
the product.
reinforcements loosen and break during
drying, they will damage your dryer.

Preparing laundry for drying

Check all laundry items before loading them
into the product to make sure that there are
no lighters, coins, metal items, needles and
etc. in their pockets or on any part of them.
be used in accordance with the instructions
of the manufacturer of the relevant products.
speed that your washing machine allows for
the laundry type.
Separate your laundry before placing them
into your dryer.
and thicknesses. Dry the same type of
and table cloths dry faster than the thick
bath towels.

Correct load capacity

A
Consider the information in the
Selection Table". Always start the
programme in accordance with the
C
Adding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance will
degrade when the machine is overloaded.
Furthermore, your dryer and your laundry
can be damaged.
C
that they will not get tangled.
C
Small tablecloths
Tea napkins
Bath towels
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
Loading
no items are caught in the door.
28 EN
1500
1000
500
350
700
250
100
700
350
150
300
200
500
350
700
100
125