Samsung T19C301 Series Service Manual page 82

Method of Color Calibration (AV)
1. Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port
2. Press the Source key to switch to "
3. Enter Service mode
4. ADC" menu
Select the "
5. Select the " AV Calibration" menu.
6. In " AV Calibration Off" status, press the " ►" key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the "AV Calibration" status from Failure to Success.
Method of Color Calibration (Component)
1. Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port
2. Press the Source key to switch to "
3.
Enter Service mode
4. Select the " ADC" menu
5. Select the " Comp Calibration" menu.
6. In " Comp Calibration
7. When Calibration is complete, it returns to the high-level menu.
8.
You can see the change of the "
Method of Color Calibration (PC)
1. Apply the VESA XGA Lattice (N0. 21) pattern signal to the PC IN port
2.
Press the Source key to switch to "
3. Enter Service mode
4. Select the " ADC" menu
5. Select the " PC Calibration" menu.
6. In " PC Calibration Off" status, press the " ►" key to perform Calibration.
7.
When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the "
Method of Color Calibration (HDMI)
1.
Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port
2. Press the Source key to switch to "
3. Enter Service mode
4. Select the " ADC" menu
5. Select the " HDMI Calibration" menu.
6. HDMI Calibration
In "
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the "
AV1" mode
Component1" mode
Off" status, press the "► " key to perform Calibration.
Comp Calibration" status from Failure to Success.
PC" mode
PC Calibration" status from Failure to Success.
HDMI1" mode
Off" status, press the " ►" key to perform Calibration.
HDMI Calibration" status from Failure to Success.
4. Troubleshooting 4. Troubleshooting
4-41 4-41