Accessories - Graco Therm-O-Flow 5 Instructions-Parts List Manual

Description
HEATED 5-GALLON FOLLOWER PLA TE ASSEMBLY
Used for 240, 480, 575 VAC.
305 mm (12") O.D. Silicone Wiper hose
CM800 Heated Module finned bottom
15:1 President finned bottom
CM800 Heated Module smooth bottom
15:1 President smooth bottom
WIPER REPAIR KIT
FOLLOWER REPAIR KIT
for Therm-O-Flow Mini-5 supply units
and Therm-O-Flow 5 units
AIR CONTROL MODULES FOR RAM AND AIR CONTROL
2 Regulator module contains controls for ram and motor
4 Regulator module contains controls for ram up, ram down, blow-off and motor
8.8 bar (125 psig) MAXIMUM WORKING PRESSURE for Ram
2-Regulator air control module for 15:1 President air motor
4-Regulator air control module for Bulldog and Senator air motors
LOW LEVEL PAIL KIT
Lights a red beacon signal when the pail is empty
CASTER BASEPLATE
Used for heated applications.
HOSE SUPPORT KIT
Supports hose to ram to prevent hose kinks. Used only in 20 l (5 gal.) applications.
AUTOMATIC CROSSOVER KIT
Switches ram operation to alternate ram, automatically
PUMP AIR MOTOR MOUNTING KIT
Used in heated applications to connect the heated CM800 pump to King, Bulldog, and
Senator air motors.
VENT HOOD KIT (5 Gallon)
Used for venting toxic fumes. Required for Polyurethane Reactive (PUR) supply units.
PUMP INACTIVITY KIT
Used to shut down the heaters if there is no pump activity. Contains proximity switch,
electronic timer, and the hardware necessary to install it in the supply unit.
PUMP REBUILD KIT
See Form# 308570 for CheckMate 800
See Form# 307431 for Mini–5 Pump
HEATER/SENSOR REPAIR KIT
Contains heaters, sensors and wires for replacing heaters and sensors
7-DAY TIMER KIT
Contains electronic timer and the hardware necessary to install the timer in the electrical
control panel

Accessories

Use Only Genuine Graco Parts and Accessories
Part No.
918501
918499
617335
617325
C31065
918505
918416
918430
918414
C31197
918393
C03510
617318
617334
C32202
C78167
310528 75