Inspection Frequency; Removing/Replacing The Cb100 Controller - Graco Therm-O-Flow 5 Instructions-Parts List Manual

Inspection Frequency

Ram
Periodically (once a month), inspect the ram guide
sleeves, rods and cylinders for wear or damage,
replace all worn parts. See the Service section of
Form# 310523, 310525, 310533 for instructions on
replacing worn parts.
Pump
See the pump's instructions for its inspection frequen-
cy.
Ground Fault Interrupt
Periodically (once a month) test the ground fault
interrupt switch by pushing the TEST button. See the
literature that came with the electrical control panel for
more information.
Service

Removing/Replacing the CB100 Controller

See Form# 309100 for instructions on removing and/or
replacing the temperature controllers on the system.
310528 39