Advertisement
General
Please read this manual carefully before using this machine, and retain it for
future reference.
This plastic extrusion welding machine pioneered using of the function of double
independent heating systems, digital display controller, 360-degree rotating welding
head, motor cold start protection, which is applicable to welding HDPE,PE,PP and other
hot melt materials.
It plays its most characteristic especially for welding PE. But do not apply to conductive
plastic (PE-EL), otherwise the machine will produce conductive short circuit.
Replacement of different welding boots can be applied to:
1. Plastic containers of welding, splicing, etc.
2. Large diameter plastic pipe, pipe fittings welding, repair, stitching, sealing, etc.
3. Thick plastic film, geomembrane splicing, repair and so on.
Ⅰ. Notice
1. CAUTION DANGER. Please confirm that the plug has been removed while
disassembling the equipment!
2. Incorrect use of the equipment will result in fire and burns!
3. The voltage on the equipment (220V) must be the same as the main voltage on the
plug, and the supply voltage shall not exceed 10% of the rated voltage of the equipment.
4. To ensure the safety of users and reliable operation of the equipment, the power
supply should be installed voltage stabilizer and leakage protection device;
5. Do not touch the soldering nozzle and metal case to prevent scalding, and do not point
the hot air to human and animals.
6. Please protect the equipment from moisture.
7. Please focus while operating.
2 / 9
Advertisement
