Pakole ACR 100W Operation And Maintenance Documentation page 7

ACR air curtains
It is important to note that the minimum distance between the device and the ceiling is not less than 150 mm. This will
ensure easy access to the water exchanger spigots, cable entries as well as free air flow to the inlet grille.
Operation and Maintenance Documentation
Wall installation by means of a horizontal brackets
The curtain can be mounted to the wall in a horizontal position using 2 mounting
brackets to the horizontal system. In the brackets there are Ø9mm holes for M8
screws. In the EPP housing, drill holes Ø 12-13mm in front of existing holes in the
steel intake grille. The exact location is indicated by the special tags on the EPP
housing and the figure below. Then insert the spacer sleeves into the holes and fix
the brackets. Screw the remaining screws into the nuts under the steel intake grille
so that both grips are in one plane. Locknuts under the handles are used to secure
the screws from unscrewing.
7