Plastic Container; Setting The Address Of The Device - Emerson Dixell iPro Master IPM500D Installing And Operating Instructions

7.2.3.8

Plastic container

Mount:
Material:
Self-extinguishing:
Comparative Tracking Index (CTI):
Colour:
7.2.3.9

Setting the address of the device

The address of the device is set via a dip-switch and numbering is binary as shown in the table
below:
If the address is changed while the device is switched on, to confirm the new address
remember to switch off and switch on again the device.
On a DIN rail (EN 50022, DIN 43880)
Fastened with screws via the removable plastic flaps.
PC-ABS Thermoplastic
V0 (UL94)
300V
Black
Not used