Sony UP-D711MD Manual page 21

NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which the UP-D711MD is used
exceeds the applicable RF compliance level above, the UP-D711MD should be observed to
verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the UP-D711MD.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Interference may occur in
the vicinity of equipment
marked with following
symbol:
7
GB