Related Manuals for Hyundai HYBC-20
Summary of Contents for Hyundai HYBC-20
- Page 1 USER MANUAL HYBC-20 BATTERY CHARGER HYBC-20 Please read and understand all important safety and operating instructions before using this charger. In addition, please read and follow all battery and vehicle manufacturer’s instructions and cautionary markings.
- Page 2 HYBC-20 We are still constantly improving this battery charger, therefore, some parts of this battery charger may be changed in order to achieve the better quality, but the main functions and operations will not be alternated and changed. Your understanding would be greatly appreciated.
-
Page 3: Table Of Contents
HYUNDAI Table of Contents SAFETY CONNECTING TO THE BATTERY ABOUT HYBC-20 CHARGING MODES CHARGING STEPS ERROR MESSAGES... -
Page 4: Safety
HYBC-20 1. SAFETY SAFETY PRECAUTIONS FOR WORKING IN THE VICINITY OF A BATTERY 1) Batteries generate explosive gases during normal operation. Use in well-ventilated area. 2) Consider having someone close enough or within the range of your voice to come to your aid when you work near a battery. -
Page 5: Connecting To The Battery
HYUNDAI 7) To reduce the risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting charger. 8) To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. -
Page 6: About Hybc-20
HYBC-20 3. ABOUT HYBC-20 1) The HYBC-20 is designed for charging all types of 12V and 24V lead-acid batteries, including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded Battery), GEL, AGM (Absorbed Glass Mat) batteries. It is suitable for charging battery capacities from 2 to 400 Amp-Hours and maintaining all battery sizes. -
Page 7: Charging Modes
HYUNDAI 4. CHARGING MODES HYBC-20 charger has ten (10) modes: STANDBY, 12V/2A, 12V/4A, 12V/6A, 12V/8A, 12V/10A, 12V/15A, 24V/3.5A, 24V/7.5A, 12V BOOST. Do not operate the charger until you confirm the appropriate charge mode for your battery. CAUTION: If you choose 24V Mode for 6V/12V battery, the 6V/12V battery will be damaged! - Page 8 HYBC-20 Using 12V BOOST BOOST Mode is the advanced mode that require your full attention before selecting. To operate BOOST, the charger must be connected to a 12V lead-acid battery with the battery clamps connected. For optimal results, allow boost to complete its 5-minute charge. After 300-second boost, digital tube will show “000”, and your are ready to start your vehicle (whether FULL LED is illuminated or not).
-
Page 9: Charging Steps
HYUNDAI 5. CHARGING STEPS Step Voltage(V) Current(A) STEP 1: DIAGNOSIS (Check if battery has connected with the charger and also check battery voltage) STEP 2: DESULPHATION (If battery voltage is too low, programs automatically generate pulsing current to remove sulphate, up to 5 hours) -
Page 10: Error Messages
HYBC-20 6. ERROR MESSAGES Warning Code on Reason(s) Solution(s) Digital Display E01 (also with After the internal temperature of charger reduces, the continuous High temperature alarming charger will automatically start charging again buzzer sound) 1) Connect the red and black clamps or ring terminals... - Page 11 We : HYUNDAI Corporation 25, Yulgok-ro 2-gil, Jongno-gu, Seoul 03143 Korea Declare that the product detailed below : BATTERY CHARGERS MODEL : HYBC-20 Satisfies the requirements of the Council Directives : EMC directive 2014/30/EU Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU...
- Page 12 HYUNDAI Corporation 25, Yulgok-ro 2-gil, Jongno-gu, Seoul 03143, Korea, Post Code : 03143 82 2 390 1114 www.hyundaicorp.com Copyright HYUNDAI Corporation All rights reserved. Made in P.R.C...