Program Saving - AEG OKO-LAVAMAT 88830 User Information

Program Saving

To safeguard a program setting against unwanted changes (e.g. pro-
gram selector turned, press additional button etc.), you can set Program
Saving. This prevents your washing being damaged.
It is possible to set and cancel Program Saving at any time during a
3
program.
Select program protection:
0 1. Select the desired program settings.
2. To start the program, press the button O/s (START/PAUSE).
3. Keep the button k (PRE-WASH) and the button q (SOAKING)
pressed simultaneously for 5 seconds. The program sequence display
flashes for 5 seconds; The program saving function is set.
No other settings can be made as long as Program Saving is set. The
3
door cannot be opened with the button K /W (DOOR/LIGHT). Also, af-
ter the washing cycle has ended, you must first cancel the program
safeguard before you can open the door.
If, during the washing cycle, you attempt you attempt to change the
selected setting by pressing a button, The program sequence display
flashes for 5 seconds.
If you attempt to change the selected setting by turning the program
selector, the program sequence display flashes until the program selec-
tor is restored to its original setting. The washing cycle is not affected.
The program selector must be in its original position before you can
3
cancel the program saving.
Delete program protection:
Keep the button k (PRE-WASH) and the button q (SOAKING)
0
pressed simultaneously for 5 seconds. The program sequence display
flashes for 5 seconds, then it lights up constantly for 5 seconds. Pro-
gram saving is cancelled.
Operating Instructions
43